Emcab cables are rigid yet flexible enough to be installed into tubes and include many options for installation by blowing.
Fiber optic cables include dielectric and metallic cables for ducts and utility tunnels.
Fiber optic cables designed for high reliability in harsh environment.
Robust designs applied in the sea between land-based stations to carry telecommunication signals.
Aerial Dielectric Self-Supporting cables.
Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in ducts, tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Designed for aerial installation on transmission towers, lamp posts, between buildings and structures.
Applied in the construction of fiber-optic link on overhead transmission lines of 35 kV and more.
Used for stationary installation when the optical fiber needs extra protection from mechanical damages.
Multi-tube (MT) fiberglass rods (FRP) double armor double jacket design for additional protection in harsh environment.
Central strength member (FRP rod)
Gel-filled loose tube
Double armor of fiberglass plastic rods
Max rated design tension up to 40 kN
Crush - 1 kN/сm
Applied in harsh environments with potential mechanical impact: in all ground types, swamps and harsh rivers
Excellent rodent resistance
|Crush — 1 kN/cm|
|Fiber count||up to 24||up to 48||up to 72||up to 96||up to 144|
|Cable diameter, mm||21.8||22.2||23.0||23.0||24.0|
|Cable weight, kg/km||496.5||519.6||553.4||548.2||587.3|
|Min bending radius, mm||327.0||333.0||345.0||345.0||360.0|
|Transportation and storage temperature||-50°С…+70°С|
|Minimum bending radius||15x cable diameter|
|Life time||25 years|