Emcab cables are rigid yet flexible enough to be installed into tubes and include many options for installation by blowing.
Fiber optic cables include dielectric and metallic cables for ducts and utility tunnels.
Fiber optic cables designed for high reliability in harsh environment.
Robust designs applied in the sea between land-based stations to carry telecommunication signals.
Aerial Dielectric Self-Supporting cables.
Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in ducts, tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Designed for aerial installation on transmission towers, lamp posts, between buildings and structures.
Applied in the construction of fiber-optic link on overhead transmission lines of 35 kV and more.
Used for stationary installation when the optical fiber needs extra protection from mechanical damages.
Stainless steel tube (SST) galvanized steel wires (GSW) design for additional protection in harsh environment.
Stainless steel tube filled with water-blocking gel
Armor of steel wires
Up to 96 fibers
Max rated design tension up to 40 kN
Crush - 1.4 kN/сm
|Crush — 1 kN/cm|
|Fiber count||up to 36||up to 48||up to 72||up to 96|
|Cable diameter, mm||9.6||9.9||10.3||10.8|
|Cable weight, kg/km||169.5||182.1||193.0||208.7|
|Min bending radius, mm||144.0||148.5||154.5||162.0|
|Crush — 1 kN/cm|
|Fiber count||up to 32||up to 48||up to 72||up to 96|
|Cable diameter, mm||10.4||10.7||11.5||11.2|
|Cable weight, kg/km||220.8||225.6||279.0||240.4|
|Min bending radius, mm||156.0||160.5||172.5||168.0|
|Transportation and storage temperature||-50°С…+70°С|
|Minimum bending radius||15x cable diameter|
|Life time||25 years|