Emcab cables are rigid yet flexible enough to be installed into tubes and include many options for installation by blowing.
Fiber optic cables include dielectric and metallic cables for ducts and utility tunnels.
Fiber optic cables designed for high reliability in harsh environment.
Robust designs applied in the sea between land-based stations to carry telecommunication signals.
Aerial cables are designed for installation on distribution and transmission lines.
Applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in ducts, tubes and blocks. Suitable for blowing-in into protecting polyethylene tubes.
Designed for aerial installation on transmission towers, lamp posts, between buildings and structures.
Applied in the construction of fiber-optic link on overhead transmission lines of 35 kV and more.
Used for stationary installation when the optical fiber needs extra protection from mechanical damages.
Inner jacket made of halogen-free flame-retardant polymer compound
Mica glass tape
Up to 24 fibers
Remains functional under direct flame for at least 180 minutes
Easy to install
|Maximum rated design tension (MRDT), kN||1.1|
|Fiber count, up to||2||4||6||8||12||16||24|
|Cable diameter, mm||10.7||11.3||11.6||11.9||12.7||13.3||14.1|
|Cable weight, kg/km||144.2||159.5||167.7||174.7||193.3||211.3||233.0|
|Minimum bending radius, mm||107||113||116||119||127||133||141|
|Operating temperature||-40°C ... +60°C|
|Installation temperature||-10°C ... +50°C|
|Transportation and storage temperature||-50°C ... +50°C|
|Minimum bending radius||10 x cable diameter|
|Design life||25 years|