Indoor

Distribution MT

Distribution micro tube (MT) is applied inside buildings (including vertical runs), in trays, channels, on outer sides of buildings, as well as in ducts, tubes and blocks. Suitable for blowing into protecting polyethylene tubes.

1

Optical fiber

2

Micro tubes

3

Aramid yarns

4

Halogen-free flame-retardant jacket

All-dielectric design

High density of fibers makes it possible to bundle up to 24 fibers into micro loose tubes and place up to 48 micro loose tubes in a cable

Flame-retardant

UV-resistant

Indoor
Max operation tension, N 400
Max installation tension, N 800
Crush — 0.1 kN/cm
Fiber count up to 8 (2х4) up to 8 (4х2) up to 12 (2х6) up to 16 (4х4) up to 24 (6х4) up to 36 (6х6) up to 48 (8х6) up to 64 (16х4) up to 72 (12х6) up to 96 (16х6) up to 144 (24х6)
Cable diameter, mm 5.5 5.9 5.8 6.2 6.7 7.4 8.0 8.8 9.0 9.9 11.5
Cable weight, kg/km 30.7 34.7 33.4 37.2 43.0 49.1 55.7 66.6 67.8 78.9 99.2
Min bending radius, mm 55 59 58 62 67 74 80 88 90 99 115
Indoor and Outdoor
Max operation tension, N 800
Max installation tension, N 1600
Crush — 0.1 kN/cm
Fiber count up to 8 (2х4) up to 8 (4х2) up to 12 (2х6) up to 16 (4х4) up to 24 (6х4) up to 36 (6х6) up to 48 (8х6) up to 64 (16х4) up to 72 (12х6) up to 96 (16х6) up to 144 (24х6)
Cable diameter, mm 6.0 6.4 6.2 6.6 7.1 7.7 8.3 9.1 9.3 10.1 11.6
Cable weight, kg/km 35.5 39.1 38.0 41.4 46.8 52.6 59.0 69.6 70.7 81.6 101.6
Min bending radius, mm 60 64 62 66 71 77 83 91 93 101 116
Start shopping
Operation temperature -10°С…+50°С
Installation temperature -10°С…+50°С
Transportation and storage temperature -50°С…+50°С
Minimum bending radius 10x cable diameter
Life time 25 years